Welcome to the home of PANDA DCS wiki.

PANDA Detector Control System

PANDA DCS Technical Design

The present structure of PANDA experiment involves several sub-detectors and sub-systems (Fig.1). The Slow Controls (SC) of each PANDA sub-detector and sub-system are planned to be monitored and controlled from a supervisory software application.

PandaCentralDCS.png

In the past, an evaluation of several SCADA development packages ( PVSS, LabView, EPICS) was performed by a PANDA slow controls subgroup and the EPICS package was selected to be the main PANDA SC software development tool.

Due to the anticipated complexity of the whole PANDA DCS and the expected staged assembly of PANDA detector, the DCS is highly needed to be modular and scalable. In order to accomplish this, each PANDA sub-detector or sub-system is envisaged to be basically autonomous but manageable from a supervisory layer.

PandaDCSPartition.png

The autonomy of each PANDA DCS partition (Fig. 2) implies that the partition should be self-controllable. This means that, specific slow control software, tailored to configure, monitor and control the hardware devices belonging to the partition, is required. Moreover, the partition specific software must be capable to share data with the supervisory layer.

In order to ensure compatible data sharing between the DCS supervisory layer and DCS partition, an EPICS Process Variable Gateway is required to be implemented by each PANDA DCS partition. Additionally, the PV Gateway will provide access rights administration and subnet interface.

The SC operation of each partition will be performed from a dedicated graphical user interface (GUI). The interface must ensure the accurate and safe operation of the partition hardware. The complete interface, or part of it, will be embedded in the PANDA supervisory software.

At the moment, the state of the art user interface to EPICS is supported by the Control System Studio (CSS) framework. The technical design of PANDA DCS is planned to provide a set of guidelines for naming conventions, and graphical interface look and feel, in order to guarantee the similarity of the independent developed modules and to simplify the integration.

The outcome of putting all the above requirements together is a PANDA DCS architecture based on a three-layer design – Supervisory, Control and Field layers. The highest level is the Supervisory one. The Control Layer is in the middle and it is the level where all the PANDA DCS partitions are connected. The Field Layer is embedded in each PANDA DCS Partition, and is made of all the devices and sensors used to monitor and control the sub-sytem.

PandaDCSLayers.png

Because the device driver software support in EPICS is limited, the software development tools used to control the lowermost layer (Field Layer) are at the free choice of the developer. The only constrain here is that the software must be integrated in the control layer with the EPICS system. However, the recommendation is that the developer, in the early stages of design, should try implement, were is possible, the same hardware and software, with EPICS support, realized by other PANDA sub-systems.

PANDA DCS Partitions

PANDA DCS partitions together with the DCS coordinators are summarized in the table below:
PANDA System DCS Partition DCS Contact
Magnets Solenoid  
Dipole  
Targets Pellet Target Alexander Gerasimov
Cluster Jet Target Bogdan Zwieglinski
Beam line and Interaction Region Interaction region  
Silicon Detectors Pixels & Strips Hans-Georg Zaunick
Luminosity Detector Florian Feldbauer
Trackers Straw Tube Tracker Mario Bragadireanu
Planar GEM Trackers Bernd Voss (?!)
Forward tracking Jerzy Smyrski
Electromagnetic Calorimeter Barrel EMC Tobias Triffterer
Backward Endcap EMC
Forward Endcap EMC
Forward Shashlyk Forward Shashlyk Sofia Bukreeva
Charged Particle ID Barrel DIRC Carsten Schwarz
Endcap Disc DIRC Avetik Hayrapetyan
Forward RICH Sergey Kononov
Barrel TOF (SciTil) Ken Suzuki
Forward TOF Denis Veretennikov
Muon system Muon system Nikolay Zhuravlev
Hypernuclear Equipment Target system Michael Bölting
Ge Det Marcell Steinen
Infrastructure Supplies  
The team taking responsibility for the controls of a PANDA DCS partition is expected to provide:
  • implementation of controls for the hardware devices belonging to the Field Layer of the partition;
  • the software running on the Control Layer of the partition;
  • the partition GUI software;
  • the autonomous operation of the partition.

The PANDA DCS sub-system manager is responsible with:
  • the preparation of DCS technical design;
  • monitor (and guarantee) the implementation of the DCS technical design;
  • the integration of the DCS partitions in the supervisory layer;
  • organize the development of the DCS supervisory software.

PANDA DCS Technical Support

Hardware and Software

  • SupportedHardware is a wiki describing the proposed/tested/supported sensor/control hardware for the PANDA DCS. Early contributions have the chance to set the standards and significantly help other detector subgroups. Please contribute.
  • PANDA CSS (outdated version!)
  • Docker Container

Process Variables Naming Convention

The naming convention for PANDA slow control process variables is outlined in this wiki: PVNamingConventions. We recommend implementing these rules early, to avoid later confusion.

Tutorials and Examples

Information exchange

News

Wiki

You are currently on the homepage of the PANDA DCS wiki, so we shouldn't need to explain how to find it... wink

To gain write access to this wiki, you have to be a member of the PandaControlsGroup. This is also required for being able to upload your talks to the TalksArchive. If you want to become a member of the PandaControlsGroup, ask its coordinator Florian Feldbauer.

Meetings

  • Next PANDA DCS session: Parallel session @ PANDA CM 19/2 at GSI;
  • The master archive with presentations from all our subgroup meetings is here: TalksArchive. Please attach your talks using your account, such that the author name is visible and easy to search for. Preferred format is PDF.

Forum

The DCS subgroup forum is located here.

Contacts

The PANDA SC subgroup has been formed in 2007. The subgroup is basically made by people, from different PANDA collaborating institutions, involved in the slow controls of the experiment, chaired by the SC sub-system manager. The most up-to-date list of DCS members can be found here. The present subgroup chairman is Florian Feldbauer.

The DCS mailing list is panda-dcs@gsi.de.

I Attachment Action Size Date Who CommentSorted ascending
PandaCentralDCS.pngpng PandaCentralDCS.png manage 69 K 2014-10-12 - 19:48 MarioBragadireanu  
PandaDCSLayers.pngpng PandaDCSLayers.png manage 110 K 2014-10-12 - 19:53 MarioBragadireanu  
PandaDCSPartition.pngpng PandaDCSPartition.png manage 66 K 2014-10-12 - 19:51 MarioBragadireanu  
dcs-fee-interface-draft-68bc99a4.pdfpdf dcs-fee-interface-draft-68bc99a4.pdf manage 268 K 2019-03-13 - 04:04 FlorianFeldbauer Concept Draft for the Interface between the PANDA DCS and the FEE
DCS-LayersDAQ-wbg-small.pngpng DCS-LayersDAQ-wbg-small.png manage 111 K 2008-04-10 - 00:30 UnknownUser DCS components (small)
DCS-LayersDAQ-generic-w-small.pngpng DCS-LayersDAQ-generic-w-small.png manage 223 K 2009-09-04 - 20:51 UnknownUser DCS components (small) with AFECS
DCS_small.pngpng DCS_small.png manage 62 K 2007-12-06 - 17:15 UnknownUser DCS interrelations graph (small)
This topic: DCS > WebHome
Topic revision: 2019-08-21, FlorianFeldbauer
Copyright © by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding Panda Wiki Send feedback | Imprint | Privacy Policy (in German)