Documentation

T. Held, M. Albrecht, T. Erlen, M. Fink, F.H. Heinsius, C. Motzko, P. Musiol, C. Schnier, M. Steinke, H.-C. Wenzel, U. Wiedner, An LED/LCD-based monitoring system for the PANDA Electromagnetic Calorimeter, Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, Volume 997, 2021, 165167, ISSN 0168-9002, https://doi.org/10.1016/j.nima.2021.165167

The light pulser monitoring system is described in the thesis of Christof Motzko, Ruhr-Universität Bochum, April 2012 (in German)

urn:nbn:de:hbz:294-35269

More up to date information can be found in the thesis of Patrick Musiol, Ruhr-Universität Bochum, June 2018 (in German) urn:nbn:de:hbz:294-57322'

Optical fibers

The optical fibers will be Silica / Silica fibers with a Polyimid jacket and a numerical aperture of 0.28. For every crystal 4 optical fibers with a core diameter of 200 µm will be mounted close to each over.

Producer Name Core diameter Cladding diameter Buffer diameter Jacket diameter Datasheet
Ceram Optec UV 200/220 P 28 200 µm 220 µm   245 µm Datasheet

Specifications

The light pulser monitoring system has to provide the following functions
  • Monitoring of the photodetector-electronics gain at a precision of 0.1% repeated at the order of minutes. The absolute stability has to be at least 0.1 % at the order of days.
  • Monitoring of the radiation damage of the crystals by comparing the output of the red/green LEDs with the blue LED. Repeated at the order of minutes, possibly within the cycle.
  • Monitoring of the linearity of the electronics: Repeated about every hour during cycle break. Precision about 10% of the resolution.

Energy resolution and corresponding number of pulses:

Energy Energy resolution Required precision Width of LP pulse Required number of pulsesSorted ascending
1 GeV 2.5% 0.25%    
20 MeV 14% 1.4%    
10 GeV 1% 0.1% 0.3% 10
100 MeV 7% 0.7% 4.3% 40

Beam structure and time for light pulses
  • Every 1.8 µs a 400ns break (bucket barrier cavity) -> time for gain checks (not at maximum energy to avoid pileup!)
  • Per cycle o(hour) about 1000s accumulation -> time for linearity checks

Number of light pulser = 44
  • 2 backward EMC
  • 32 barrel EMC
  • 10 forward EMC

Light pulser properties
  • repetition rate 30 Hz

-- ChristofMotzko - 23 Oct 2009

-- FritzHerbertHeinsius - 11 Mar 2021
Topic revision: r4 - 11 Mar 2021, FritzHerbertHeinsius
 
This site is powered by FoswikiCopyright © by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding PANDA Wiki? Send feedback
Imprint (in German)
Privacy Policy (in German)