You are on: PANDA > Wiki > Magnet > Intro > IntroSol

Solenoid Overview

The provision of a magnetic field of 2T over a length of about 4m and a diameter of 1.9m whilst simultaneously keeping this region free for detectors is far from trivial. The technological challenge is complicated by additional requirements concerning, e.g. field homogeneity (see table below), the intersection of a warm target feed pipe and detector access, to name only a few.

We have designed the PANDA solenoid magnet using a superconducting split coil with Rutherford type cable and indirect cooling. Though the detector layout requires an asymmetric arrangement of the cryostat and flux return yoke, the stringent requirements for the field, its homogeneity and the magnetic forces are satisfied by this design. The cryostat will surround all detectors and serve as their mounting structure. The flux-return yoke will serve as an active muon range system by incorporating mini-drift tubes between 13 layers of iron. Both ends of the return yoke will be fabricated as opening doors, whilst in parts simultaneously serving as the muon range system. In addition, the whole set up of more than 300t will be retractable to a parking position well outside the beam, where it can be operated for commissioning and maintenance.

The main parameters are summarised in the table below.

Item Value
Central field 2.0 T
Field homogeneity ≤2%
Norm. radial field integral ≤2 mm
Inner bore 1.9 m
Cold mass parameters
Length 2.7 m
Energy 20 MJ
Current 5000 A
Weight 4.5 t
Cable cross section 3.4 × 2 mm2
Current density 59 A/mm2
Yoke parameters
Length 4.9 m
Outer radius 2.30 m
Iron layers 13
Total weight 300 t

The field becomes ineffective for the very forward going particles. This is covered by the dipole, see dipole description.


View of the solenoid (1/4 cut for visibility)
View of the solenoid from the upstream side (1/4 cut off for visibility). Grey: cryostat, inner red parts: coils, blue: flux return yoke, red bars: support structure.

View of cryostat, coil and turret
View of coil, cryostat and cryogenic turret (1/2 cut off for visibility). Green: coil former, brown: coils, red and black: supporting structures and cooling line, grey: outer housing of cryostat and turret.

________________________

You are on: PANDA > Wiki > Magnet > Intro > IntroSol
I Attachment Action Size DateSorted ascending Who Comment
CryoView-suspended_Renzo0906_01_small.pngpng CryoView-suspended_Renzo0906_01_small.png manage 88 K 2009-10-20 - 18:04 IntiLehmann Schematic view of coil and cryostat highlighting suspensions
Solenoid_3D_upstream_small.pngpng Solenoid_3D_upstream_small.png manage 83 K 2009-10-20 - 18:10 IntiLehmann View of the solenoid (1/4 cut for visibility)
Panda_coil_cryostat_small.pngpng Panda_coil_cryostat_small.png manage 73 K 2009-11-16 - 16:20 IntiLehmann View of cryostat, coil and turret
Topic revision: r10 - 2009-11-26, IntiLehmann
Copyright © by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding Panda Wiki Send feedback | Imprint | Privacy Policy (in German)